Stanley SHP 2150 Instrucciones De Montaje, Cuidado Y Uso página 8

PREPARATION
ASSEMBLY INSTRUCTIONS
6
1
Unlocked
Locking Spray Gun (before Lance installation)
To lock trigger of spray gun (H), point gun away
from you and turn dial to lock ("3" and "9" position).
Squeeze or pull trigger to make sure it is locked.
ALWAYS leave in locked position when not in
use. This ensures the gun is in "safe" mode until it
is ready for use. Turn dial to unlock ("12" and "6"
position) to release spray gun trigger.
The trigger lock prevents trigger from being
Note:
accidentally engaged.
8
F
Attach nozzles (G) into end of lance (F) by pressing
selected nozzle into place. It will make a "click" sound
when firmly in place.
Note: Always turn the safety lock dial to lock trigger
when changing lances and nozzles to ensure that they
do not accidentally eject with force during removal.
8
93908_16ANR030_2150_ENG-FR-SP.indd 8
H
Locked
G
7
F
Lance Installation
While spray gun (H) is in the locked position, insert
lance (F) into the end of spray gun by inserting and
turning clockwise until fully in place. To remove
turn counterclockwise.
9
2
F
To remove nozzle (G), pull back on collar of lance (F)
.
and pull out nozzle
H
G
1
16/12/23 下午1:05