Ingersoll Rand R30 Información Del Producto página 32

93014.15.06
EN
Pages 4-5: Software Information
Figure 62 : Software Information
These pages are used for displaying software information for the controller.
All items are read only.
Pages 6-10: Maximum Values
The maximum values pages are used to record the highest value the
controller has seen since the last time the maximum values have been reset.
Each maximum value entry displays the highest value recorded as well as the
time and date stamp of when these maximum values have occurred.
The fi nal maximum value page has a reset setting at the bottom of the page,
highlighting this button and hitting enter will cause the controller to clear all
history of maximum values and begin recording them again. The password
must be entered in order to use this reset functionality.
Pages 11-12: VSD Diagnostics
The VSD Diagnostics screens are used to troubleshoot any drive problems.
These screens must only be used by authorized service technicians.
The password must be entered in order to activate these diagnostic
tests.
EN-32
Figure 63 : Maximum Values
Figure 64 : VSD Diagnostics
NOTICE
Pages 13 -16: VSD Service Menus
Figure 65 : VSD Service Menus
The VSD service menus contain parameters used to set up the compressor for
optimal operation.
These screens must only be used by authorized service technicians.
The password must be entered in order to modify these parameters.
NOTICE
80447162 Rev B