Before You Begin; Quick Reference - Speedaire 40KH93 Instrucciones De Funcionamiento Y Manual De Piezas

BEFORE YOU BEGIN

Introduction
This pump is designed with an oil lubrication system that requires use of oil. A small amount of oil carryover is
present in the compressed air stream. Applications requiring air free of oil vapor should have the appropriate
filter installed. The air compressor pump should be mounted and installed per the listed instructions. Any other
use of these pumps will void the warranty and the manufacturer will not be responsible for problems or damages
resulting from such misuse.

Quick Reference

Recommended Oil (2 Options)
Single viscosity SAE 30 ISO100 nondetergent compressor oil. Part number 1WG50 or
4ZF21.
10W30 synthetic oil such as Mobil 1
Oil Capacity
Approximately 40 oz.
UNPACKING
tubes or coolers. Do not use unit to lift other attached equipment.
After unpacking the unit, inspect carefully for any damage that may have occurred during transit. Check for
loose, missing or damaged parts. Check to be sure all supplied accessories are enclosed with the unit. In case of
questions, damaged or missing parts, please call 1-855-504-5678 for customer assistance.
Required Items - Not Included
• Oil
® or 1WG49.
Do not lift or move unit without appropriately rated equipment. Be sure
the unit is securely attached to lifting device used. Do not lift unit by holding onto
Do not operate unit if damaged during shipping, handling or use. Damage
may result in bursting and cause injury or property damage.
1