Canon Selphy CP790 Guia Del Usuario página 37

4
5
SELPHY may not operate correctly if it is connected to a computer via a USB hub.

SELPHY may not function properly if other USB devices (with the exception of a USB mouse

or USB keyboard) are used at the same time. Disconnect any other USB devices from your
computer and then reconnect SELPHY.
Do not put your computer into the standby mode (or sleep mode) while SELPHY is connected to

the computer's USB port. If you accidentally do so, awaken the computer from the standby mode
without disconnecting the USB cable.
For details on how to awaken the computer refer to the user guide provided with your computer.

3
Turn on SELPHY.
Press the q button to turn on SELPHY.

Windows
When the installation finishes, click [Restart]

to restart the computer and complete the
installation.
Confirm that the software has been
started properly.
 The software will start and the screen on the
left will appear when a connection between
SELPHY and the computer is established.
From now on, the software will automatically

start when you perform Steps 2 to 4.
Windows
If the screen at the left does not appear, choose

from the [Start] menu r [All Programs] r
[Canon Utilities] r [SELPHY Photo Print] r
[SELPHY Photo Print].
Macintosh
If the screen at the left does not appear, follow

these steps to register your printer:
After clicking [ ] in the menu, click [System
Preferences], then [Print & Fax] to bring up the
[Print & Fax] window. Click [+], choose [CP790]
from the pop-up window and click [Add].
After you have finished registering your printer,
click [SELPHY Photo Print] from the Dock (the
bar at the bottom of the desktop), and the screen
at the left will appear.