Cleaning Up After Printing - Canon Selphy CP790 Guia Del Usuario

Cleaning Up After Printing

After you finish printing, follow the steps below to clean up and store SELPHY.
Turn the power off

Unplug the power cord from the power outlet and disconnect the adapter plug from SELPHY.

If the compact power adapter is hot, wait until it has cooled down before you store it.

Remove the paper cassette and close the paper cassette compartment cover. Keep the remaining

paper inside the cassette.
Keep the ink cassette inside SELPHY.

Clean up easily by placing the printer accessories into the basket.
Ink (when there is more
than one cassette)
Power Cord
Do not store anything other than printer accessories or consumables in the basket. Doing so may
damage the basket or the accessories.
Do not unpack paper before it is used, and keep it in a dark place.

If you have more than one ink cassette, store one inside SELPHY and the other in the basket. Any

additional ink cassettes should be placed in a bag and stored in a dark place where the ink sheet
will not get dusty.
1
(p. 15), then remove the memory card.
Storing the Accessories
Paper Cassette
Compact Power Adapter