Setting Up Selphy - Canon Selphy CP790 Guia Del Usuario

Changing the Information Displayed on the Screen
You can change the information that is displayed on the screen. However, if SELPHY's power is turned
off the setting will return to [Tool Tips].
No information

Setting Up SELPHY

Length of the paper or more
Never place SELPHY close to motors or other devices that generate strong electromagnetic fields.

This may damage or cause the printer to malfunction.
Do not place near television or radio. This may cause the printer to malfunction.

The LCD monitor may be covered with a thin plastic film for protection against scratches during
shipment. If so, remove the film before using SELPHY.
Change the information displays.
While in the image display screen

the m
Press the udbuttons, or turn the w wheel to

choose [Info Display] and press the o button.
Press the udbuttons, or turn the w wheel to

choose a settings, then press the o button.
Commands only
(Default setting)
Place SELPHY on a stable and even surface,

such as a table. Never place it on an unstable or
10 cm (4 in.)
or more tilted surface.
Keep SELPHY at least 1 m (3 ft.) from devices

emitting electromagnetic waves or strong
magnetic fields.
Make sure there is at least 10 cm (4 in.) of free

space around SELPHY.
Make sure there is free space of at least the
10 cm (4 in.) 
or more
length of the paper behind SELPHY. (During
printing the paper will pass in and out.)
button.
(EDIT)
Image
information
(p. 15), press
Print settings