Printing from Your Mobile Phone
You can print pictures taken with infrared (IrSimple or IrDA IR) or Bluetooth compatible mobile phones
without using a cable.
You cannot establish a wireless connection between a computer and SELPHY.
The maximum file size that can be transmitted is 2
Data transmission time increases when data size is large. Therefore, the amount of time before
printing will also increase.
Movies, e-mail, address book information, or images attached to an e-mail or downloaded from
the Internet cannot be printed.
Depending on the mobile phone model you use, images saved on the memory card may not be
printed.
SELPHY automatically sets the print orientation.
Depending on the paper size you use, the edges of the image may be cropped.
Infrared (IrSimple or IrDA IR) Wireless Printing
You can print pictures taken on Infrared (IrSimple or IrDA IR) compatible mobile phones without using
a cable. For details on how to use your mobile phone or on printing methods via Infrared, refer to the
user guide provided with your mobile phone.
1
Be sure the phone
2
is no more than
20cm (8 in.) away
from the infrared
sensor.
(Be sure nothing is
blocking the signal)
If transmission cannot be completed, move the phone closer to and directly in front of the infrared
sensor.
Available range
10° in all directions
3 MB (varies depending on mobile phone).
–
Make sure that there is no memory
card inserted and that no computer is
connected to SELPHY.
Transfer images from your mobile phone
to SELPHY.
Printing starts after data transmission is
completed.
1