Philips SW7700 Manual Del Usuario página 21

2
1
The replacement reminder indicates that the
shaving heads need to be replaced.The
replacement reminder flashes when you switch the
shaver off.
1 Switch the shaver off.
2 Pull the shaving head holder off the bottom
part of the shaving unit.
3 Turn the retaining ring anticlockwise and lift it
off the shaving head.
Repeat this process for the other retaining rings.
Place them aside in a safe place.
4 Remove the shaving heads from the shaving
head holder.
Discard the used shaving heads immediately to
avoid mixing them with the new shaving heads.
5 Place the new shaving heads in the shaving
head holder.
Note: Make sure the notches on both sides of
the shaving heads fit exactly onto the
projections in the shaving head holder.
21
English