Operating Instructions - Pull Chain; Maintenance; Blade Cleaning - Fanimation The WindPointe FP7300 Manual Del Propietário

1. Restore electrical power to the outlet box by turning the
electricity on at the main fuse box. (Figure 1)
2. Check the operation of the fan by gently pulling on the
pull chain switch. (Figure 2)
Pull Chain Operating Sequence
1 st Pull
nd
2 Pull
3 rd Pull
4 th Pull
3. If airflow is desired in the opposite direction, turn the
fan off and wait for the blades to stop turning. Then slide
the reverse switch to the opposite position and turn fan
on again. Your fan model is equipped with a 4-position,
3-speed, pull chain switch. The operating sequence is as
follows: (Figure 3)
Reverse Switch Information
Season Rotation Direction
Summer Counter-Clockwise
Winter Clockwise
4. <<FP7500RSP4LK ONLY>>
Check the operation of the down light by gently pulling
on the light kit pull chain. (Figure 4)
Light Kit Pull Chain Operating Sequence
1 st Pull On
2 nd Pull Off
Periodic cleaning of your new ceiling fan is the only
maintenance that is needed.
When cleaning, use only a soft brush or lint free cloth to
avoid scratching the fi nish.
Abrasive cleaning agents are not required and should be
avoided to prevent damage to fi nish.
Periodic light dusting of the blades is recommended.
A feather duster will work best.

Operating Instructions - Pull Chain

High
Medium
Low
Off
Switch Position
Right
Left

Maintenance

Blade Cleaning

Reversing
Switch
CAUTION
Do not use water when cleaning your ceiling fan. It
could damage the motor or the blades and create the
possibility of electrical shock.
Avoid using water, cleansers, or harsh rags, which can
warp and ruin the blades.
11
MAIN FUSE BOX
Figure 1
FP7500RSP4LK
Figure 2
FP7500RSP4LK
Figure 3
Figure 4
Reversing
Switch