Carlo De Giorgi Blue Sky 637/00 Manual De Instrucciones página 25

67PS6UPS`ÃHD8SPHPUPSÃÃ7 V@ÃTF`
  23(5$725 ,16758&7,216
  &21752/6 $1' 32:(5 6833/< 81,7
The laboratory micromotor is equipped with the following command and
control devices located on the power supply unit:
 s‚… ‡ur irpu ‡‚ƒ€‚qry …rsr… ‡‚ Avt
a) Main power switch (white) (1).
b) White tool rotation direction selector illuminated pushbutton (reverse)
(6). When reverse tool rotation is selected (normal=clockwise,
reverse=counterclockwise) the relative indicator lamp illuminates.
c) Tool rotation footpedal (2) (bench-top model only).
d) Tool speed potentiometer control knob (7) (bench-top model only).
e) Motor rpm display (R.P.M. x 100 – bench-top model only) (8).
f) Pedal type speed control (10) (floor model only).
  ,16758&7,216 )25 86(
  6WDUWXS
With the appliance powered down for safety, fit the required tool to the
handpiece. This is done by turning the lever (A - Fig. 3) through 90° in a
clockwise or counterclockwise direction, inserting the tool into collet (B).
Now return lever (A) to its original position to lock the tool in place.
The appliance can now be powered up by means of main power switch
(1).
8h…y‚ÃqrÃBv‚…tvÃ
± s‚… ‡ur sy‚‚… €‚qry …rsr… ‡‚ Avt !


)LJ  IORRU PRGHO

@IÃÃ(Ã
Ã