Carlo De Giorgi Blue Sky 637/00 Manual De Instrucciones página 29

67PS6UPS`ÃHD8SPHPUPSÃÃ7 V@ÃTF`
  5HSODFLQJ WKH PRWRU DQGRU FDEOH
If you need to change the internal motor due to deterioration of original
performance levels, proceed as follows (refer to Figs. 5 and 6):
- unscrew the rear end cap (G) shown in Fig. 6 after freeing the cable to
prevent it from becoming twisted when removing/fitting the end cap;
- unscrew the three screws (H) shown in Fig. 5;
- extract the motor from its location after detaching connector (L) as
shown in Fig. 6.
When refitting the end cap after installing a new motor take care not to
twist the connecting wires.
8h…y‚ÃqrÃBv‚…tvÃ
+
)LJ 
/
)LJ 
Ã
*
@IÃÃ "Ã