Publicidad
G Calibrating the Stylus F Calibrage du stylet
G IMPORTANT! The mark made on your
screen from the stylus and the location
of the tip of the stylus may not align.
When this happens, you need to
calibrate the stylus.
• Turn the toy's power on.Wait until
you see the Home Screen.
• Turn the toy over and locate the
calibration hole.
D Den Stift ausrichten
™
32
• Insert, push and hold the stylus in the
calibration hole.Turn the toy over so
that you can see the screen.
• When you see two
stylus from the calibration hole.
• First touch the
corner with the tip of the stylus.
• Then, touch the
corner with the tip of the stylus.
, remove the
in the upper left
in the lower right
Publicidad
