Electrical Requirements - Dacor DTI30M Serie Instrucciones De Instalación

Installation requirements

Electrical requirements

WARNING
Electrical Shock Hazard
Disconnect power before servicing.
Use 8 gauge solid copper wire.
Electrically ground cooktop.
• Refer the label on the bottom or
front of the cooktop for power
requirements and model information.
This cooktop must be connected to a grounded metal, permanent wiring system.
Be sure that the electrical connection and wire size are adequate and in conformance with
the National Electrical Code, ANSI/NFPA 70-latest edition or CSA Standards C22.
1-94, Canadian Electrical Code, Part 1 and C22.2 No. O-M91-latest edition, and all local
codes and ordinances.
A copy of the above code standards can be obtained from:
National Fire Protection Association
1 Batterymarch Park
Quincy, MA 02169-7471
CSA International
178 Rexdale Boulevard,
Toronto, ON, Canada M9W 1R3
12 English
NZ9500K_MOD_DTI30M977B_DG68-00898A-00_EN+MES+CFR.indb 12
Label
Label
Failure to follow these instructions can
result in death, fire, or electrical shock.
If codes permit and a separate ground
wire is used, it is recommended that a
qualified electrical installer determine that
the ground path and the wire gauge are in
accordance with local codes.
Check with a qualified electrical installer
if you are not sure the cooktop is properly
grounded.
2017-04-05 3:02:29