Electrical And Grounding Safety - Dacor DTG30M954F Serie Manual De Usuario

Important safety instructions

Electrical and grounding safety

WARNING
To reduce the risk of fire, electric shock, personal injury, or death, observe these
precautions:
• Plug the power cord into a grounded 3-prong outlet.
• Do not remove the grounding prong.
• Do not use an adapter or an extension cord.
• Do not use a damaged power plug, power cord, or loose power outlet.
• Do not modify the power plug, cord, or outlet.
• Do not put a fuse in a neutral or ground circuit.
• Use a dedicated 120-volt, 60-Hz, 15-amp, AC, fused electrical circuit for this cooktop.
A time-delay fuse or circuit breaker is recommended. Do not plug more than one
appliance into this circuit.
• Do not connect the ground wire to plastic plumbing lines, gas lines, or hot water pipes.
• This cooktop must be grounded. If the cooktop malfunctions or breaks down, grounding
reduces the risk of electric shock by providing a safe path for the current. This
cooktop's power cord has a grounding plug, which must be firmly plugged into an
outlet that is properly installed and grounded according to local regulations. If you
are not sure your electrical outlet is properly grounded, have it checked by a licensed
electrician.
• If codes allow for a separate ground wire, you should have a qualified electrician
determine this wire's proper path.
• Electrical service to the cooktop must conform to local codes, or in the absence of local
codes, to the National Electrical code/NFPA No. 70 – Latest Revision (for the U.S.) or the
Canadian Electrical Code CSA C22.1 or Latest Revisions.
• The cooktop owner shall ensure that the proper electrical service is provided for the
cooktop.
14 English
NA9300K_MOD_DTG30M954FS_DG68-00927A-02_EN+MES+CFR.indb 14 2019-04-23 2:59:58