4-Operation And Comissioning; Depuro Pro/Depuro Pro Evo General Operation - Vortice DEPURO PRO Serie Manual De Instrucciones

4. OPERATION AND COMISSIONING

4.1 DEPURO PRO/DEPURO PRO EVO GENERAL OPERATION:

DEPURO PRO/DEPURO PRO EVO products are easy to install, use and maintain.
They draw in contaminated air from the top part of the two side panels through the backward curved impeller fan. Once the air has
been purified and sanitised, in the case of EVO models, it is then expelled from the bottom of the unit. (see fig.2)
To operate the DEPURO PRO it first needs to be connected to the electrical supply (230V / 50-60Hz).
The following parameters can be set via the control panel:
1. Switch the product on/off
2. Activate the automatic function
3. Adjust the processed air flow rate
4. Program operation to favour low energy consumption when rooms are empty.
5. An alarm signals when filters are clogged and when subsequent replacement/maintenance is required. This
alarm can be programmed for operating hours (see the specific Regulator manual enclosed with the equipment).
*
For more details and the specific control operation, consult the Regulator Emanual enclosed with the
equipment (REG DEPURO).
Fig.2
45