4-Operation And Comissioning; Depuro Pro General Operation - Vortice DEPURO PRO 150 Manual De Instrucciones

4. OPERATION AND COMISSIONING

4.1 DEPURO PRO GENERAL OPERATION:

The DEPURO PRO product has a simple and intuitive operation to facilitate the users or persons who install or perform
maintenance on it.
In general, the DEPURO PRO intakes contaminated air from the two upper sides of the DEPURO PRO by the backward
impeller. Once the air is cleaned and purified through the filters, it is driven to the bottom of the unit. (see Fig. 2)
To switch on and operate with the DEPURO PRO, it must be electrical supplied (generally 230V / 50Hz but it can also
operate at 60Hz).
It is also equipped by a control panel* that allows set up the following parameters:
1. On/Off of the air Purifier.
2. Automatic function – Autonomous.
3. Flow adjustment, 0 being the lowest and 10 the highest.
4. Schedule control for night mode optimization and thus favoring low energy consumption when the
interior spaces are empty.
5. Clogged filter alarm and maintenance indication. Esta alarma se puede programar por horas de
funcionamiento (Ver manual específico REG FILTER adjunto con el equipo)
*
For more details and the specific control operation, consult the REG FILTER manual enclosed with
the equipment.
Fig.2
28