Shaft Alignment Tool - SKF TKSA 40 Instrucciones De Uso

2. Shaft alignment tool

2.1 Content of the case
The following components are included with the TKSA 40 tools:
• Display unit
• 2 measuring units with spirit levels
• 2 mechanical shaft fixtures
• 2 locking chains
• Tape measure
• Quick start guide
• Certificate of calibration
• CD ROM, including:
- Instructions for use
- Quick start guide
- Instructional video
• USB cable
• Batteries
• Carrying case
Fig. 5. Content of the case
SKF TKSA 40 7