Tty Operation - Motorola V323i CDMA Motomanual

To pair your phone to a headset accessory,
handsfree car kit, or PC that supports
Bluetooth wireless connections:
Find it: Press r > w Settings > Connection
> Bluetooth Link > Handsfree > [Look For Devices]
Your phone displays a list of device(s) located
within range of the phone. If your phone is
already connected to a device, your phone
lists that device and identifies it with a \
(in-use indicator). Once a connection is
established with a device, no other device can
connect to your phone until the currently
connected device is disconnected.
1 Highlight a device in the list of devices
your phone found.
2 Press r to connect the device.
3 If the device requests permission to bond
with your phone, select YES and enter the
22 main attractions
device PIN code to create a secure
connection with the device.
Note: The default PIN code is 0000.
When the connection is made, the à
(Bluetooth) indicator or a Bluetooth message
displays in the home screen.
For specific information about an accessory,
refer to the instructions that came with it.

TTY operation

You can use an optional TTY device with
your phone to send and receive calls. You
must plug the TTY device into the phone's
headset connector and set the phone to
operate in one of three TTY modes.
Note: Use a TSB-121 compliant cable
(provided by the TTY manufacturer) to
connect the TTY device to your phone.