Telefunken TB 300 City Guia De Inicio Rapido página 16

Handset icons
Flashes to indicate an incoming
external call
External call in progress
Flashes to indicate an incoming
internal call
Internal call in progress
3 Way call in progress or transfer
external call to another Balance
handset registered to the base during
an external call
Indicates signal strength
Flashes when handset is not
registered to the base or if you go out
of range
Menu open
Phonebook open
Flashes to indicate new calls list
entries received*
Answered call (when viewing the Calls
list)*
Unanswered call (when viewing the
Calls list)*
Keypad locked
◄ ► The displayed number is longer than
12 digits
Battery charge full
Battery charge medium
Battery charge low
Flashing - Battery charge nearly empty
TELEPHONING
Making a call
- In direct dialing
1. Press .
2. Wait for the dial tone and then dial the
number.
- In pre-dialling
1. Dial the number. In case of error, press
.
2. Press : the number is dialled.
3. Press
Ending a call
1. Press .
Once the handset is replaced, the call
duration is displayed for 15 seconds.
Internal calls
- Calling another handset
If you have more than one handset registered
to the database, you can make internal calls
between two handsets.
1. Press the
keypad) followed by the number of the
handset number (1 to 5) that you wish to
call.
2. Press OK to dial.
Note: When receiving an internal call, the
display shows
5
again to make a HF call.
button (bottom right of
.