Application Of The Burner To Boiler - baltur BGN 40 DSPGN-ME Manual De Instrucciones

APPLICATION OF THE BURNER TO BOILER

for model BGN 40 ÷ 250 DSPGN-ME (steel fixing flange)
1 - Boiler plate
2 - Insulating gasket
3 - Burner fixing flange
4 - Elastic collar
for model BGN 300 - 350 DSPGN-ME
REMARKS
When tightening the flange, it is important to do it evenly so that the inner faces are parallel between
them. Since the locking system is highly efficient, do not tighten the nuts too much.
During this operation (tightening of the flange locking nuts) keep the body of the burner lifted so that the
combustion head is kept in a horizontal position.
5 - Stud bolt
6 - Locking nut with washer
7 - Nut and washer for fastening the first flange
1 - Boiler plate
2 - Insulating gasket
3 - Burner fixing flange
4 - Stud bolt
5 - Locking nut with washer
24
ENGLISH