Installing This Navigation System; Installation Notes - Pioneer AVIC-F320BT Manual Del Usuario

Installation
Installing this navigation
system

Installation notes

! Do not install this navigation system in
places where it may become subject to
high temperatures or humidity, such as:
— Places close to a heater, vent or air con-
ditioner.
— Places exposed to direct sunlight, such
as on top of the dashboard.
— Places that may be splashed by rain, for
example close to the door.
! Install this navigation system in an area
strong enough to bear its weight. Choose a
position where this navigation system can
be firmly installed, and install it securely. If
this navigation system is not securely in-
stalled, the current location of the vehicle
cannot be displayed correctly.
! Install the navigation unit horizontally on a
surface within 0 degrees to 30 degrees tol-
erance (within 10 degrees to the left or
right). Improper installation of the unit with
the surface tilted more than these toler-
ances increases the potential for errors in
the location display, and might otherwise
cause reduced display performance.
30°
10°
! When installing, to ensure proper heat dis-
persal when using this unit, make sure you
leave ample space behind the rear panel
and wrap any loose cables so they are not
blocking the vents.
! The semiconductor laser will be damaged
if it overheats, so don't install the naviga-
tion unit anywhere hot —for instance, near
a heater outlet.
! Do not install this navigation system where
detaching the detachable device from the
head unit is hampered by the gear stick or
any other objects. Before installing this na-
vigation system, be sure to leave sufficient
space so that the detachable device does
not prevent operation of the gear stick
when it is detached. Otherwise, this may
cause interference with the gear stick, or a
malfunction of the detaching mechanism.
10°
Dashboard
5 cm
10 cm
Leave ample space
Engb
Section
04
15