Beta 1760 PA/AC Manual Del Usario página 11

Capacity Measurements
Warning: to avoid electric shock, disconnect power to the unit under test and discharge all
capacitors before taking any capacitance measurements. Remove the batteries and unplug the
line cords.
1 Set the rotary function switch to the cap position.
2 Insert the black test lead banana plug into the negative (COM) jack.
Insert the red test lead banana plug into the positive V jack.
3 Touch the test leads to the capacitor to be tested.
4 Read the capacitance value in the display
Frequency or % duty cycle measurements
1 Set the rotary function switch to the "Hz/%" position
2 Insert the black lead banana plug into the negative COM jack and the red test lead banana
plug into the positive V jack.
3 Select Hz or % , duty with the Hz/% button
4 Touch the test probe tips to the circuit under test.
5 Read the frequency on the display.
Temperature Measurements
Warning: to avoid electric shock, disconnect both test probes from any source of voltage befo-
re making a temperature measurement.
1 Set the function switch to TEMP.
11