KOBE IS-124 Serie Instrucciones De Instalación Y Manual De Operación página 11

Ductwork Installation
Use 8" round aluminum or steel pipe (not
provided) to connect the plastic
Duct Cover Installation
11. Slide the inner duct cover up and secure to
the top of the telescopic stack with two
screws (provided).
12. Slide the outer duct cover downward so that
it sits properly on the hood.
Final Assembly
13. Install the Aluminum Filters.
14. Turn power ON in control panel. Check all
lights and fan operation.
15. Make sure to leave this manual for the
homeowner.
9