Daikin FWF02CATNMV1 Manual De Instalación página 7

Unidades de serpentín de ventilador de agua fría
Ocultar thumbs Ver también para FWF02CATNMV1:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 44
Cover Lock Grille (The moving part protection for user direct touching)
Cover lock grille must be installed as the figure below.
Frame
Intake Grille
Cover Lock Grille
(2pcs)
Screw M4 x 6
(2pcs)
If the unit need to be service, steps below shall be followed:
1. Confirm that the unit had been switched off before servicing the unit.
2. Use screwdriver to unlock the screw on the cover lock grille.
3. Remove the cover lock grille and open the intake grille for the service purpose.
4. Install the intake grille and screw the cover lock grille after service and make sure the unit is proper install.
1-5

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Fwf03catnmv1Fwf04catnmv1

Tabla de contenido