Instructions For External Calibration; Interior Calibration - Gram AHS Serie Manual De Utilización

Instructions for external calibration

1. First remove all objects from weighing tray.
2. Press
3. The balance will show the required weight for calibration. Place the
required weight as indicated on the screen on the center.
4. Once the required weight is placed on the balance it will show lines
"-------" across the screen, Then it will show another required weight
once more. Repeat the procedures until it set back to zero. Calibration
is complete.

Interior calibration

1. First remove all objects from weighing tray.
2. Press
the required weight.
3. Press
required weight once more.
4. Place the required weight as indicated on the screen in the center. Once
the required weight is placed on the balance it will show lines "------"
across the screen.
5. Then it will show & flash another required weight once more.
6. Repeat the procedure 4. & 5. until it set back to zero. Calibration is
complete.
8
for abt 3 seconds, the balance show "CAL", calibration begins.
key for abt 3 seconds, the balance will show "CAL" and then
for abt 3 seconds, the balance will show "CAL" and the