Calibration; Linearity Calibration - Gram AHZ Serie Manual De Utilización

CALIbRATION

1. Press the
2. The display will show "d3".
3. If your balance is the AHZ-300 model, press the
shows the message "d2", then, the display will show "200g". Put on the
weighing pan a calibration weight of 200g.
4. If your balance is the AHZ-600 model, press the
shows the message "d5", than, the display will show "500g". Put on the
weighing pan a calibration weight of 500 g.
5. If your balance is the AHZ-3000 model, press the
screen shows the message "d3", the display will show "3000g". Put on
the weighing pan a calibration weight of 3000 g.
6. The display will show automatically "-CAL-".
7. The display´s reading will remain with the value of calibration
weight.
8. The calibration procedure has finished.

LINEARITY CALIbRATION

1. Press the
2. Press again the
--L".
3. If your balance is the AHZ-300 model, the display will show "100g".
Put on the weighing pan a calibration weight of 100g.
12
key for 3 seconds.
key for 3 seconds.
key until the screen shows the message "CAL-
key until the screen
key until the screen
key until the