Weighing Accumulation Function; On / Off Save Power; Calibration - Gram C4 Serie Manual De Utilización

Weighing accumulation function

When the weight is stable, press the C key on the remote control to accumulate
the display values and view the accumulation times "n32", 2 seconds later,
back to normal weighing mode.
To cancel accumulation function, press the B key on remote control and
returns to normal weighing mode.

ON / Off Save power

Press the A key on remote control for 2 seconds, the display will power off,
only shows "-" to save power.
Press the A key on remote control for 2 seconds, back to normal weighing mode.

CALIBRATION

1. Power on the crane scale and press the D key on remote control until
display shows "CAL SP".
2. The display will show "CAL 00", press A key on remote control once to
display "CAL00".
3. Do not hang on the hook any goods at this time.
4. Display will show "LOAD", press the 8 key on remote control view "-------"
and then later on display "LOAD".
5. Press the D key on remote control to input the calibration weight value
(long press D key on remote control to increase the number of digit, click
to the left shift)
8