When Connecting To Separately Sold Power Amp; When Connecting The External Video Component And The Display - Pioneer AVH-X8500BT Manual De Instalación

Section
01 Connecting the units

When connecting to separately sold power amp

Rear output
Front output
This product
Subwoofer
output
Blue/white
Connect to system control
terminal of the power amp
(max. 300 mA 12 V DC).
Blue/white (5*)
The pin position of the ISO connector will differ
depending on the type of vehicle. Connect 5* and
6* when Pin 5 is an antenna control type. In
another type of vehicle, never connect 5* and 6*.
Perform these connections when
using the optional amplifier.
4
En
Power amp
(sold separately)
To front output
Power amp
(sold separately)
To rear output
Power amp
(sold separately)
To subwoofer
output
Connect with RCA cables
(sold separately)
System remote control
Blue/white (6*)
Connect to auto-antenna
relay control terminal
(max. 300 mA 12 V DC).
Left Right
Subwoofer Subwoofer
Rear speaker Rear speaker
Front speaker Front speaker
Connecting the units

When connecting the external video component and the display

Audio inputs
(REAR AUDIO INPUT R)
Audio inputs
(REAR AUDIO INPUT L)
10 cm
RCA connector
This product
Rear audio output
(REAR AUDIO OUT)
! It is necessary to change AV Input in the
system menu when connecting the external
video component.
This product's rear video output and rear audio
output are for connection of a display to enable
passengers in the rear seats to watch the DVD,
etc.
WARNING
! Never install a rear display in a location that is
visible to the driver while the vehicle is in motion.
External video component
(sold separately)
To video
output
To audio
outputs
RCA cables
Video input
(sold separately)
(REAR VIDEO INPUT)
Rear monitor output
(REAR VIDEO OUTPUT)
Mini pin plug cable
(sold separately)
To audio
inputs
Display with RCA input
jacks (sold separately)
To video
input