ANNUAL VERIFICATION:
For your safety, you should systematically check your equipment before, during and after
use, if in doubt for a fall and at least every 12 months by the manufacturer or a competent
person authorized by him. This frequency may vary in accordance with the frequency and
the intensity of use. The descriptive data sheet must be filled in each time the product is
checked.
MAINTENANCE AND STORAGE: (These instructions must be strictly observed)
During transportation, keep the equipment away from any cutting edges and in its
packaging. Clean with soapy water, dry with a dry cloth and hang it in a naturally ventilated
area away from any direct fire or heat source, as well as any elements which became wet
during their usage. Bleaches and detergents are strictly prohibited. The equipment must be
stored in a temperate, dry and ventilated area in its packaging protected from sunlight, heat
and chemical products.
Watch our videos
12