FOR VESA 200 x 100 MOUNTING PATTERN:
Choose hole pattern as shown below. Attach adapter plate (N) to back of screen using four
3
0 [ PP VFUHZV E) as shown below.
*NOTE: If screw (E) gets less than three threads of engagement, attach adapter plate (N) to
EDFN RI VFUHHQ XVLQJ IRXU 0 [ PP VFUHZV F) and four spacers (C) as indicated below.
Skip to step 4 on page 12.
N
FOR VESA 200 x 200 MOUNTING PATTERN:
Choose hole pattern as shown below. Attach adapter plate (N) to back of screen using four
M6 x 12 mm screws (G) as shown below.
*NOTE: If screw (G) gets less than three threads of engagement, attach adapter plate (N)
to back of screen using four M6 x 20 mm screws (I). If screw (I) still gets less than three
threads of engagement, use four M6 x 30 mm screws (J).
Skip to step 4 on page 12.
N
E
G
*For screens with
a hole pattern in a
pocket, spacers (C)
go between adapter
plate (N) and screen.
9 of 45
C
ISSUED: 11-02-09 SHEET #: 095-9302-1