Advice On Disposal - UFESA AC2501 Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 1
4
Disconnect the suction tube and the nozzle or the
brush.
5
Disconnect the suction tube from the hose. In order
to remove the telescopic handle from the hose handle,
press latch "A" and pull the tube towards the arrow.
6
Press two side buttons on the hose ending and
remove the ending from the vacuum' s outlet opening.
7
Your vacuum cleaner may be stored in horizontal
or vertical position. The hose may stay fastened to the
vacuum cleaner, but make sure that it is not bent too
hard when stored.
Horizontal storing:
– insert the fastening hook of the suction brush into
the clip fastening the suction brush which is located
on the back side of the vacuum.
Vertical storing:
– place the suction brush on the telescopic tube,
– insert the fastening hook located on the telescopic
tube into the clip fastening the telescopic tube which
is located at the bottom of the vacuum right next to
to the front wheel.
8
The vacuum' s housing and compartment may
be wiped with a wet cloth (it may be moistened with
a detergent), dried or wiped until dry.
Do not use scouring agents or solvents.
Problems that may occur when
operating the vacuum
PROBLEM
The bag has been
damaged.
Your vacuum
cleaner is not
working efficiently
enough.
Power installation
fuse triggered.
WHAT TO DO
Replace the bag and the
filters.
Replace bag and filters, check
the suction tube, hose and
nozzle – remove the reasons
for clogging.
Check whether there are other
electric appliances plugged
into the same electric circuit,
if the fuse turns on repeatedly,
take the vacuum cleaner to
the service.
PROBLEM
Your vacuum
cleaner fails to
work, the housing
is damaged or
the power cord is
damaged.

Advice on disposal

Our goods come in optimised packaging. This
basically consists in using non-contaminating
materials which should be handed over to the local
waste disposal service as secondary raw materials.
This product complies with EU Directive
2002/96/EC. The crossed wheelie bin
symbol shown on the appliance indicates that
when it comes to dispose of the product it
must not be included in with household refuse. It must
be taken to a special refuse collection point for electric
and electronic appliances or returned to the distributor
when purchasing a similar appliance. Under current
refuse disposal regulations, users who fail to take
discarded appliances to special refuse collection points
may be penalised. Correct disposal of discarded
appliances means that they can be recycled and
processed ecologically, helping the environment and
allowing materials used in the product to be reused.
For more information on available waste disposal
schemes contact your local refuse service or the shop
where the product was purchased. Manufacturers and
importers are responsible for ecological recycling,
processing and disposal of products, whether directly
or via a public system.
Your local town council can provide you with information
about how to dispose of obsolete appliances.
The manufacturer does not accept any liability for any damages
resulting from unintended use or inappropriate handling.
The manufacturer reserves his right to modify the product any
time in order to adjust it to the law, standards, directives, or due
to construction, trade, aesthetic or other reasons, without prior
notice.
WHAT TO DO
Take your vacuum cleaner to
the service.

Publicidad

Tabla de contenido
loading

Tabla de contenido