Publicidad
STEP 2C
CAUTION:
Avoid potential personal injury
or property damage!
● Studs must be at least 2x4 / 25 ga.
● If back side of wall is unfinished, drywall must be
installed to a minimum of one stud left and right of
the stud(s) being used to install the mount
● Drywall must be a minimum of 1/2 in. (13
mm) thick on each side of the studs, and
a minimum clearance of 1 ⅞ in. (48 mm)
behind the wall is required
● This product must be centered on the studs
● Stud type and structural strength must conform to
the North American Specification for the Design of
Cold-Formed Steel Structural Members
[362 S 125 18, C-Shape, S - Stud Section]
● Drywall must be secured to studs with screws
12 in. (304.8 mm) on center
Min.
16 in. (40.6 cm)
14
Steel Stud
Installation
Steel Stud Installation Kit #SSMK1 is NOT INCLUDED
1/4-20 SNAP Toggle BB
Contact Customer Service at 800-359-5520 to inquire about the SSMK1 kit.
*
NOTE:
Two (2) kits are required
if you need to extend wall
plate
(see PAGE 9).
S1
x4
1/4-20 x 1 ¾ in.
to fit your TV
06
x4
S2
*
S3
x4
1/4 in.
Publicidad
