Wood Stud Installation - Sanus BXT3 Manual Del Usuario

STEP 2A
CAUTION:
Avoid potential personal injury or property damage!
●
Drywall covering the wall must not exceed 5/8 in. (16 mm)
●
Minimum wood stud size: nominal 2 x 4 in. (51 x 102 mm) actual 1 ½ x 3 ½ in. (38 x 89 mm)
●
Minimum horizontal space between fasteners: 16 in. (406 mm)
●
Stud centers must be verified
1
Max.
5/8 in. (16 mm)
16 in. (406 mm)
Locate studs. Verify the center of the stud(s) using an awl,
a thin nail, or an edge to edge stud finder.
10
Wood Stud
Min.
Installation
2
06
CAUTION:
*
You MUST install 2 lag bolts
of wall plate
06
for a minimum of 6 lag bolts total.
Place wall plate
Level the wall plate
FOR EXTENDED WALL PLATES:
into the center (top and bottom)
07
, then a minimum of 16 in. (406 mm) out from center,
at your desired height, over your stud center lines.
06
and mark the four (or six) hole locations .
06
*