LaserLiner BeamControl-Master BCM Instrucciones Para Su Uso página 15

Adjust horizontal
Start adjusting the vial (X) by turning the
levelling screws (A) and (B).
i
Note: Please look always vertically at the
vial in order to avoid reading errors.
Now turn the levelling screw (C) to adjust
the vial (Y).
i
Note: Repeat the whole action, if
necessary.
Adjust vertical
Set the BCM up vertically on its integral
handles or mount the BCM onto a stand.
Now adjust only the level (Z) with the
levelling screw (C).
Operation
Switch on BCM:
Hold the key "On/Off" pressed for 1 second, the head of BCM starts
rotating, the rotation mode is activated.
1. Spot mode:
The rotation laser sends out a laser beam
exactly to thans ofe point over a great
distance. In order to get into the spot mode
reduce the speed by me to zero.
Change position
on rotation laser
with SensoCommander
BeamControl-Master BCM
A
level
X
level Z
.
ENGLISH
Deutsch
B
level Y
C
C
15
1