General Safety Instructions - LaserLiner BeamControl-Master BCM Instrucciones Para Su Uso

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 43
BeamControl-Master BCM
BCM Basic-Plus 120 rotary laser 635 nm, horizontal/vertical. A special die-cast-zinc plat-
form guarantees long-term stability. Vertical reference beam, 5 operating modes, adju-
stable and positionable scan angle, with remote control facility, laser reception range
120 m, precision 2 mm/10 m.
Incl.: SensoCommander 120, universal mount, cloth bag and batteries.

General safety instructions

Caution: Do not look directly into the beam. Lasers must be kept out of reach of child-
LASER RADIATION!
DO NOT STARE INTO THE
EN 60825-1:2007-10
calibration before use, after transport and after extended periods of storage. We also
wish to point out that absolute calibration is only possible in a specialist workshop.
Calibration by yourself is only approximate and the accuracy of the calibration will
depend on the care with which you proceed.
Note:
This product is a precision instrument that must be handled and treated with care.
Avoid shocks and impact. Always keep and carry in the case! Switch laser off. For
cleaning, use a soft cloth and glass cleaner.
Warranty
The manufacturer grants a warranty for this instrument for a period of 24 months after
date of purchase. Within this period we will, at our own discretion, repair all defects
based on faulty material or workmanship, or we will replace these parts.Excluded from
this warranty are: damages caused by improper use (operation with unsuitable electrical
power/tension; connection to unsuitable power sources) or storage, normal wear and
also defects which do not or do only hardly minimze the value or the suitability of the
instrument. This warranty becomes null and void in cases unauthorized persons attempt
to repair this instrument. The warranty only becomes valid when the date of purchase
has been verified by stamp and signature of the dealer, and the serial number of the
device is to be stated, too. The warranty is valid in all countries where this instrument is
being sold by UMAREX-Laserliner or by authorized dealers. In case of a claim under this
warranty please return this instrument, together with all accompanying information and
the invoice, to an authorized dealer or to the manufacturer.
ren. Never intentionally aim the device at people.
This is a quality laser measuring device and is 100%
BEAM!
factory adjusted within the stated tolerance. For
CLASS 2 LASER
reasons of product liability, we must also draw your
attention to the following: Regularly check the
i
BeamControl-Master BCM
ENGLISH
11

Publicidad

Tabla de contenido
loading

Tabla de contenido