Symbols; Safety Warnings; Safety Instructions For Specific Circular Saws - Festool TS 75 EBQ Manual De Instrucciones Original

Contents
1 Symbols..................................................... 17
2 Safety warnings.........................................17
3 Intended use..............................................20
4 Technical data........................................... 20
5 Operation................................................... 21
6 Settings......................................................21
7 Working with the electric power tool........23
8 Service and maintenance..........................24
9 Accessories............................................... 24
10 Environment.............................................. 25
11 General information.................................. 25
1

Symbols

Warning of general danger
Warning of electric shock
Read the operating instructions and
safety instructions.
Wear a dust mask.
Wear protective gloves when changing
tools and working with raw materials.
Wear ear protection.
Wear protective goggles.
Do not dispose of it with domestic
waste.
Disconnecting the mains power cable
Connecting the mains power cable
Direction of rotation of saw and the
saw blade
Saw blade measurement
a = diameter
Electro-dynamic run-down brake
STOP
Electronics with adjustable, constant
speed and temperature monitoring
Safety class II
CE marking: Confirms the conformity
of the power tool with the European
Community directives.
UKCA marking: The United Kingdom
Conformity Assessed symbol is a
marking for products being placed on
the market in the United Kingdom. It is
a manufacturers indication that the
product is in conformance with the rel­
evant regulations in the UK.
Tip or advice
Handling instruction
The specified illustrations appear at the begin­
ning of the Operating Instructions.
2

Safety warnings

2.1 General power tool safety warnings
WARNING! Read all safety warnings, in­
structions, illustrations and specifica­
tions provided with this power tool. Failure to
follow all instructions listed below may result in
electric shock, fire and/or serious injury.
Save all warnings and instructions for future
reference.
The term "power tool" in the warnings refers to
your mains-operated (corded) power tool or
battery-operated (cordless) power tool.
2.2 Safety instructions for specific circular
saws
- Only for AS/NZS: The tool shall always be
supplied via residual current device with a
rated residual current of 30 mA or less.
Cutting procedures
- DANGER: Keep hands away from cut­
ting area and the blade. Keep your second
hand on auxiliary handle, or motor hous­
ing. If both hands are holding the saw, they
cannot be cut by the blade.
- Do not reach underneath the workpiece.
The guard cannot protect you from the
blade below the workpiece.
Adjust the cutting depth to the thickness of
-
the workpiece. Less than a full tooth of the
blade teeth should be visible below the
workpiece.
Never hold the workpiece in your hands or
-
across your leg while cutting. Secure the
workpiece to a stable platform. It is impor­
tant to support the work properly to mini­
mise body exposure, blade binding, or loss
of control.
English
17