Aluminium Processing; Emission Levels; Intended Use; Saw Blades - Festool TS 75 EBQ Manual De Instrucciones Original

English
– Check whether there are any signs of dam­
age to the housing components, such as
cracks or stress whitening. Have any dam­
aged components repaired before using the
power tool.
Use appropriate detection devices to look
–
for any hidden supply lines or consult your
local utility company. If the insertion tool
makes contact with live cables, it can result
in fire and electric shock. Damage to a gas
pipe can lead to an explosion. Penetration
of a water pipe can result in damage to
property.
2.5

Aluminium processing

When sawing aluminium, the following
measures must be taken for safety reasons:
– Connect the power tool to a suitable dust
extractor.
– Regularly clean dust deposits from the mo­
tor housing on the power tool.
– Use an aluminium saw blade.
Wear protective goggles.
– When sawing panels, they must be lubrica­
ted with petroleum but thin-walled profiles
(up to 3 mm) can be sawed without lubrica­
tion.
2.6

Emission levels

The levels determined in accordance
with EN 62841 are typically:
Sound pressure level
Sound power level
Uncertainty
CAUTION
Noise generated when working
Risk of damage to hearing
► Use ear protection.
Vibration emission level a
three directions) and uncertainty K measured in
accordance with EN 62841:
Sawing wood
Sawing metal
The specified emission levels (vibration, noise)
20
L = 88 dB(A)
PA
L = 99 dB(A)
WA
K = 3 dB
(vector sum for
h
a 3,5 m/s
h
K = 2 m/s
a 3,5 m/s
h
K = 2 m/s
– are used to compare machines.
– They are also used for making preliminary
estimates regarding vibration and noise
load during operation.
– They represent the primary applications of
the power tool.
The emission values may deviate from the
specified values. This is dependent on how
the tool is used and the type of workpiece
being machined.
► The actual load during the entire operating
cycle must be evaluated.
► Depending on the actual load, suitable pro­
tective measures must be defined in order
to protect the operator.
3

Intended use

Circular saws are designed for sawing wood,
materials similar to wood, gypsum and cement-
bonded fibre materials and plastics. When fitted
with the special saw blades for aluminium that
are offered by Festool, these machines can also
be used for sawing aluminium.
Materials containing asbestos must NOT be
processed.
Do not use cutting or abrasive wheels.
This power tool may only be used by experts or
instructed persons.
The user is liable for improper or non-in­
tended use.
3.1

Saw blades

Only use saw blades with the following dimen­
sions:
– Saw blades according to EN 847-1
– Saw blade diameter 210 mm
– Cutting width 2.4 mm to 2.6 mm
– Locating bore 30 mm
– Standard blade thickness Max. 1.8 mm
– Suitable for speeds of up to 5000 rpm
Festool saw blades comply with EN 847-1.
Only saw materials for which the saw blade in
question has been designed.
4

Technical data

2
Circular saw
2
Performance
2
2
no-load speed
CAUTION
TS 75 EBQ, TS 75 EQ
(110 V version: 13 A)
1350–4400 rpm
1600 W