Symbols; Safety Warnings - Festool KSC 60 EB Manual De Instrucciones

English
Contents
1 Symbols..................................................... 24
2 Safety warnings.........................................24
3 Intended use..............................................27
4 Technical data........................................... 28
5 Parts of the device.....................................28
6 Commissioning..........................................28
7 Battery pack.............................................. 29
8 Settings......................................................29
9 Working with the electric power tool........31
10 Maintenance and care...............................35
11 Transportation...........................................35
12 Accessories............................................... 36
13 Environment.............................................. 37
14 General information.................................. 37
1

Symbols

Warning of general danger
Warning of electric shock
Read the operating instructions and
safety instructions.
Wear ear protection.
Wear protective gloves when changing
tools!
Wear a dust mask.
Wear protective goggles.
Do not look directly at the light.
Direction of rotation of saw and the
saw blade
Danger area! Keep hands away!
Cutting injury hazard caused by ex­
posed saw blade
Risk of pinching fingers and hands!
Warning: Hot surface
Electro-dynamic run-down brake
STOP
24
Removing the battery pack
Inserting the battery pack
Maximum power with two battery
packs (36 V).
Less power with one battery pack
(18 V).
Do not dispose of it with domestic
waste.
Tool contains a chip which stores data.
See section 14.1
CE marking: Confirms the conformity
of the power tool with the European
Community directives.
UKCA marking: The United Kingdom
Conformity Assessed symbol is a
marking for products being placed on
the market in the United Kingdom. It is
a manufacturers indication that the
product is in conformance with the rel­
evant regulations in the UK.
Handling instruction
Tip or advice
2

Safety warnings

2.1 General power tool safety warnings
WARNING! Read all safety warnings, in­
structions, illustrations and specifica­
tions provided with this power tool. Failure to
follow all instructions listed below may result in
electric shock, fire and/or serious injury.
Save all warnings and instructions for future
reference.
The term "power tool" in the warnings refers to
your mains-operated (corded) power tool or
battery-operated (cordless) power tool.
2.2 Safety instructions for mitre saws
Mitre saws are intended to cut wood or
-
wood-like products, they cannot be used
with abrasive cut-off wheels for cutting
ferrous material such as bars, rods, studs,
etc. Abrasive dust causes moving parts