Bresser 8962142 Instrucciones De Uso página 11

interaction between your eyes and the
eyepieces of your binoculars set the angle
at the centre of the binoculars (1) so that
you see a circular image (12). Note this
setting for later use.
Adjusting the focus
Look through your binoculars with your right
eye closed. Now adjust the image for your
left eye using the centre wheel (6) until it is
sharp and clear. Close your left eye and ad-
just the image for your right eye using the
dioptre ring (3) until it too is sharp and clear.
Using the Zoom Function
You can use the zoom lever (10) to select
various levels of magnification (11); in
general, the zoom is continuous. Simply
move the lever back or forth to zoom.
Please note: When changing the magnifi-
cation setting, it is necessary to re-adjust
the image sharpness using the centre fo-
cussing wheel (6).
P C
P C
Mounting the binoculars on a tripod
Your binoculars have a threaded tripod
connection (9) built in. The required tripod
adapter is available as an optional acces-
sory (Art. No. 1916001). With this accesso-
ry, you are able to mount your binoculars
on all BRESSER tripods with a DIN mount-
ing thread (e.g. Art. No. 4922100).
TIPS on cleaning
Lenses (eyepieces and object lenses)
should be cleaned with a soft, lint-free cloth
(e.g. microfibre) only. Do not use excessive
pressure - this may scratch the lens.
Dampen the cleaning cloth with a specta-
cle cleaning fluid and use it on very dirty
lenses.
Protect the device against dirt and dust.
Leave it to dry properly after use at room
temperature. Then put the dust caps on
and store the device in the case provided.
P
DE
GB
FR
NL
IT
ES
PT
DK
CZ
PL
RU
11