Placing Tool In Service - Ingersoll Rand 307A Manual De Instrucciones

LUBRICATION
Ingersoll- - Rand No. 50
Always use an air line lubricator with this tool.
We recommend the following Filter- - Lubricator- - Regulator
Unit:
For International - - No. C28- - C4- - FKG0
For USA - - No. C28- - 04- - FKG0- - 28
After each eight hours of operation, if an air line
lubricator is not used, inject 1/2 cc of Ingersoll- - Rand
No. 50 Oil into the Air Inlet.
Model Type of
Handle
307A Lever
Tested in accordance with PNEUROP PN8NTC1.2
H
♦ Tested in accordance with ISO8662- - 1 with artificial unbalanced load at 50% of rated speed for ungoverned tools and at
80% rated free speed for governed tools.

PLACING TOOL IN SERVICE

Ingersoll- - Rand No. 67
SPECIFICATIONS
Collet size
1/4"
MAIN LINES 3 TIMES
AIR TOOL INLET SIZE
TO
AIR
SYSTEM
TO
AIR
TOOL
LUBRICATOR
REGULATOR
BRANCH LINE 2 TIMES
AIR TOOL INLET SIZE
DRAIN REGULARLY
Free HSound Level
Speed dB (A)
Pressure
27,000 86
3
FILTER
COMPRESSOR
(Dwg. TPD905- -1)
♦Vibrations
Level
2
Power m/s
99 4.9