Placing Tool In Service - Ingersoll Rand 99V-EU Serie Manual De Instrucciones

WARNING: Incorrect combinations of grinding wheel, wheel guard and tool speed could result in injury.
Correct combinations are specified below:
Guard Part Number
99V60–A216A
99V60–A216MA
99V60–206–7
99V60–106–9
99V77–106–7
LUBRICATION
Ingersoll–Rand No. 50
Always use an air line lubricator with these tools.
We recommend the following Filter–Lubricator–Regulator
Unit:
For International – No. FRL30–C6–A29
Before starting the tool, unless the air line lubricator is used,
detach the air hose and inject about 1.5 cc of oil into the air
inlet. For models with a built–in oiler, remove the Oil
Chamber Plug from the Cylinder Case and fill the chamber.
Model Free Speed
L. C.
99V60P107M–EU 6,000
99V60P109–EU 6,000
99V60P109M–EU 6,000
99V85P107M–EU 8,500
Model Free Speed
L. C.
99V45S106–EU 4,500
99V60S106–EU 6,000
99V60S106M–EU 6,000
H
Tested in accordance with ANSI S5.1–1971 at free speed
♦
Tested in accordance with ISO8662–4
•
ISO3744

PLACING TOOL IN SERVICE

Wheel Type Wheel Diameter
in. (mm)
6 and 11 5 (127) or 6 (150)
6 and 11 5 (127) or 6 (150)
6 and 11 7 (180)
27 and 28 9 (230)
27 and 28 7 (180)
SPECIFICATIONS
Type 27 and 28 Wheel
inches
7
9
9
7
Type 6 and 11 Wheel
inches
5 or 6
5 or 6
5 or 6
Maximum Wheel
Thickness
in. (mm)
– – –
– – –
– – –
1/4 (6.4)
1/4 (6.4)
MAIN LINES 3 TIMES
AIR TOOL INLET SIZE
TO
AIR
SYSTEM
TO
AIR
TOOL
LUBRICATOR
FILTER
REGULATOR
BRANCH LINE 2 TIMES
AIR TOOL INLET SIZE
DRAIN REGULARLY
H
Spindle and Sound Level
Guard
Pressure
5/8–11, 7" 84.4
5/8–11, 9" 85.5
5/8–11, 9" 85.5
5/8–11, 7" 106.0
H
Spindle and Sound Level
Guard
Pressure
5/8–11, 6" – – –
5/8–11, 6" 85.4
5/8–11,6" 85.4
3
Maximum Speed
rpm
6,000
6,000
6,000
6,000
8,500
COMPRESSOR
(Dwg. TPD905–1)
♦
Vibrations
dB (A) Level
•
2
Power m/s
– – – 1.5
98.5 0.9
98.5 0.9
119.0 1.4
♦
Vibrations
dB (A) Level
• 2
Power m/s
– – – 1.1
98.5 0.6
98.4 0.6