Placing Tool In Service - Ingersoll Rand DG600G2 Manual De Funcionamiento Y Mantenimiento

LUBRICATION
Ingersoll–Rand No. 10
Always use an air line lubricator with these Grinders.
We recommend the following Filter–Regulator–Lubricator
Unit:
For USA – No. C05–02–G00
For International – No. C01–C2–T29
After each two hours of operation, if an air line
lubricator is not used, inject 0.5 to 1.0 cc of the
recommended oil into the Air Inlet.
Model
DG600G2

PLACING TOOL IN SERVICE

HOW TO ORDER A PENCIL DIE GRINDER
Collet Size
inches mm
1/8 3.2
MAIN LINES 3 TIMES
AIR TOOL INLET SIZE
TO
AIR
SYSTEM
TO
AIR
TOOL
LUBRICATOR
REGULATOR
BRANCH LINE 2 TIMES
AIR TOOL INLET SIZE
DRAIN REGULARLY
Length
inches
5.343
3
FILTER
COMPRESSOR
(Dwg. TPD905–1)
Free Speed
mm rpm
136 60,000