Placing Tool In Service - Ingersoll Rand DG600G2–EU Manual De Instrucciones

LUBRICATION
Ingersoll–Rand No. 10
Always use an air line lubricator with these Grinders.
We recommend the following Filter–Regulator–Lubricator
Unit:
International –C01–C2–T29
After each two hours of operation, if an air line
lubricator is not used, inject 0.5 to 1.0 cc of oil into the Air
Inlet.
Model
DG600G2–EU
G Tested in accordance with ANSI S5.1–1971 at free speed
♦ Tested in accordance with ISO8662–1 with artificial unbalanced load at 50% of rated speed for ungoverned tools and at
80% rated free speed for governed tools.

PLACING TOOL IN SERVICE

SPECIFICATIONS
Free Speed Collet Size
rpm in
60 000 ––
MAIN LINES 3 TIMES
AIR TOOL INLET SIZE
TO
AIR
SYSTEM
TO
AIR
TOOL
LUBRICATOR
REGULATOR
BRANCH LINE 2 TIMES
AIR TOOL INLET SIZE
DRAIN REGULARLY
GSound Level
dB (A)
mm Pressure
3 79
3
FILTER
COMPRESSOR
(Dwg. TPD905–1)
♦Vibrations
Level
Power m/s
– – – 4.01
2