Metra 99-4544 Instrucciones De Instalación página 8

Buick Skylark 1983-1985
1. Remove (4) screws from the top edge of the
instrument panel. (Figure A)
2. Remove (1) screw from the bottom-left corner of
the panel. (Figure A)
3. Remove (2) screws from the steering column trim
and remove the trim.
4. Pull up and out on the dash trim bezel and remove.
5. Remove the hardware securing the factory
mounting brackets to the factory head unit.
(Figure B)
6. Remove and retain the brackets.
Continue to kit assembly
(S10 application
shown as example)
(Figure A) (Figure B)
Dash Disassembly 99-4544
Buick Skylark
1987-1989
1. Unsnap the gear shifter bezel from the base
of the console.
2. Remove (2) screws securing the bottom of the
dash trim bezel and remove the bezel. (Figure A)
3. Remove the hardware securing the factory
mounting brackets to the factory head unit.
(Figure B)
4. Remove and retain the brackets.
Continue to kit assembly
(S10 application
shown as example)
(Figure A) (Figure B)
8
Buick Skylark 1990-1995
1. Pull out on the ashtray and remove (2) screws
exposed in the ashtray cavity.
2. Remove (2) screws securing the front of the
ashtray and lower section of the dash trim bezel.
(Figure A)
3. Using a panel removal tool, gently pry out on the
trim bezel and remove.
4. Remove (2) nuts from the bottom of the factory
head unit and disconnect the wiring.
5. Remove the hardware securing the factory
mounting brackets to the factory head unit.
(Figure B)
6. Remove and retain the brackets.
Continue to kit assembly
(S10 application
shown as example)
(Figure A) (Figure B)