Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Dash Disassembly 99-4544
Saturn
(all models)
1991-1994
1. Gently unclip the dash trim bezel. (Figure A)
2. Remove (2) screws from the factory head unit and
disconnect the wiring.
3. Cut and remove all mounting tabs on Bracket #6
EXCEPT tabs "A". (Figure B)
Note: Identify mounting tabs by the stamped letter
on the back of each tab.
Continue to kit assembly
"A"
(Figure A)
(Figure B)
1. Choose a faceplate (according
to the desired installation
depth) and snap it onto the
front of the radio housing.
(Figure A)
Note: If an equalizer will
be included in the installation,
"A"
(Figure A)
Kit Assembly 99-4544

All Vehicles

the equalizer faceplate
must be used.
2. Slide the equalizer brackets
into the slots along the inner
walls of the radio housing.
(Figure B)
(Figure B)
28
3. Top and/or bottom mounting
brackets:
Secure the mounting bracket(s)
to the housing with carriage
bolts and keps nuts or studs
and nuts. (Figure C)
(Figure C)

Publicidad

Capítulos

Tabla de contenido
loading

Este manual también es adecuado para:

Ibr-444gm

Tabla de contenido