Metra 99-4544 Instrucciones De Instalación página 9

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Cadillac Deville 1985-1995
Fleetwood 1985-1993
1. Remove (2) screws from the top of the radio
trim bezel.
2. Pull out on the top edge of the bezel and lift up
to remove. (Figure A)
3. Remove the hardware securing the factory
mounting brackets to the factory head unit.
(Figure B)
4. Remove and retain the brackets.
Continue to kit assembly
(S10 application
shown as example)
(Figure A)
(Figure B)
Dash Disassembly 99-4544
Cadillac Eldorado/Seville
1984-1991
1. Remove (2) Phillips screws above the A/C vents.
(Figure A)
2. Pull out on the top edge of the dash trim bezel
unhook the bottom edge and remove.
3. Remove the hardware securing the factory
mounting brackets to the factory head unit.
(Figure B)
4. Remove and retain the brackets.
Continue to kit assembly
(S10 application
shown as example)
(Figure A)
(Figure B)
9
Cadillac Escalade/Chevrolet
Silverado 1999-2002,
Chevrolet Pickup/Suburban/
Tahoe 1995-2002, GMC
Sierra/Suburban/Yukon
1995-2002
1. Remove the steering column filler panel and the
ashtray. (Figure A)
2. Unclip the dash trim bezel and remove.
3. Using a small flat-blade screwdriver, press
down on the outer clips of the factory head unit
(or pocket).
4. Disconnect the wiring and remove the unit. Locate
Bracket Set #8. (Figure B)
Continue to kit assembly
(Figure A)
(Figure B)

Publicidad

Capítulos

Tabla de contenido
loading

Este manual también es adecuado para:

Ibr-444gm

Tabla de contenido