Configuration Menu; Pairing Up With Mobile Phones Or Other Bluetooth Devices; Mobile Phone - Nolan N-Com B601 X Serie Manual Del Usuario

7

CONFIGURATION MENU

All Bluetooth pair ups and other adjustments are carried out in this mode.
To put the system in "Configuration mode" (starting from a switched off system) press the "n" key and keep it
pressed for 4 seconds, until you hear the voice announcement " Configuration Menu ".
Once in the "Configuration" menu, press the keys"" and "" to scroll through the various menu items. In the
items marked with an "*", it is possible to enable / disable the function or carry out the commands by pressing
the "n" key to confirm.
The following items make up the "Configuration" menu:
A. Mobile phone pairing (chapter 8)
B. Intercom pairing (chapter 14)
C. Universal Intercom pairing (chapter 15)
D. Second mobile phone pairing (chapter 10)
E. Speed dial* (chapter 9.1)
F. Smart Navi System (chapter 11)
G. Delete all pairings*
In order to delete all Bluetooth pair ups stored in the device, press the key "" or "" until you hear the
voice announcement " Delete all pairings ".
Press the "n" confirmation key to delete all Bluetooth devices stored in memory.
H. Reset*
In order to restore the factory settings of the device, press the key "" or "" until you hear the voice
message " Reset ".
Press the "n" confirmation key to restore all the factory settings of the device.
I. Exiting the configuration*
To exit the "Configuration" menu, press the key "" or "" until you hear the voice announcement " Exit
the configuration ".
Press the "n" confirmation key to exit the "Configuration" menu.
If no key is pressed within 10 seconds, the device automatically exits the "Configuration" menu.
8

PAIRING UP WITH MOBILE PHONES OR OTHER BLUETOOTH DEVICES

 Make sure the B601 is turned off.
 Put the system in the "Configuration" mode: press the "n" key and keep it pressed for 4 seconds, until you
hear the voice announcement " Configuration Menu ".
 Press the "" key to access the "Mobile phone pair up mode".
 Turn on the search for Bluetooth devices (smartphone, GPS, MP3 reader) on the device.
 Select the N-Com device. If a password is requested, enter 0000 (four zeros).
 Connection between the two devices is established after a few seconds.
Note: The affiliation is stored in the helmet and in the cell phone and it is not lost when the two devices are
turned off. As a result it needs to be carried out only once.
Automatic Connection
Manual Connection
9

MOBILE PHONE

To pair up a mobile phone to the B601 system, follow the procedure illustrated in Chapter 8.
Answering a phone call
Once the Bluetooth device has been paired up, connection is automatic when the
system is turned on.
In case connection is not automatically initiated after a few seconds, you can
connect from the Bluetooth device or by pressing "n" and keep it pressed for
about 2 seconds.
Briefly press any key when you hear the incoming call signal.
15