Positioning The Microphone In The X-903 Helmet - Nolan N-Com B601 X Serie Manual Del Usuario

EN
N.B. If the system does not work, remove the flex and repeat the previous operation, making sure that the "n"
is positioned as in Fig. 6.
 Secure the keypad flex in the specials stop (Fig. 8).
Fig. 6
 Position the e-box in its seat, arranging the keypad flex cable so that it does not interfere with the positioning
of the e-box, as illustrated in figures 9-10-11.
Fig. 9
Fig. 12
3.3

Positioning the microphone in the X-903 helmet

 Hook up the specific microphone for full-face helmets in its seat in the chin guard (Fig. 13).
 Position the microphone wire in the vertical groove (Fig. 14) and afterwards behind the cheek pad lining. If
necessary, lift up the groove tabs and the cheek pad lining using a flat head tool (supplied as standard
equipment).
Fig. 13
8
Fig. 7
Fig. 10
 Position the left loudspeaker in its seat, inserting the cable in the
special groove. If necessary, secure the earphone using the adhesive
supplied as standard equipment (Fig. 12).
Fig. 14
Fig. 8
Fig. 11
Fig. 15