Ocultar thumbs Ver también para Zenith Relax:

Publicidad

Hamax ID: 522077
User Manual Zenith Relax with carrier bow_v1_November 2014 (US Version)
Hamax AS
Vålerveien 159
N-1599 Moss
Norway
Tel.: +47 69 23 38 38
email: customerservice@hamax.no
www.hamax.com
User
Manual
Zenith Relax
Approved according to
ASTM F1625-00(2012)
EN
User Manual
Congratulations on purchasing the Hamax bicycle child seat. You now have
a comfortable and safe child seat when used as intended that can be
adjusted to fit your child as she/he grows.
Please read the User Manual carefully before assembling or using the child seat.
WARNING! Failure to comply with the manufacturer's instructions
can lead to serious injury or death of the passenger/rider!
Keep the User Manual in a safe place and review periodically and if you
buy extra equipment for your child seat.
EN
CAUTION!
FR
MISE EN GARDE!
ES
¡CUIDADO!
BIKE FRAME TUBE
OK!
NOT OK!
Ø = 28 - 40mm
NOT OK!
NOT
OK
OK
WARNING:
The bracket screws must be tightened hard
Improper installation, use or maintenance of
enough to fix the seat securely and prevent it
the bicycle child seat can result in serious
from sliding. Check the tightness of the
injury or death to the child or rider. To reduce
bracket screws frequently.
these risks read and follow the important
• For optimal comfort and safety of the child,
warnings and instructions below.
ensure that the seat does not slope forwards,
so that the child does not tend to slide out of it.
• ALWAYS use the safety belt/restraint
• Hamax recommend that the backrest should
system and ensure the child is snugly
slope slightly backwards.
restrained in the seat.
• Check that all parts of the bike function
• ALWAYS Ensure the rider and child wear
correctly with the bicycle seat mounted.
approved and properly fitted bicycle helmets.
• NEVER leave a child unattended in the carrier.
USE
• NEVER leave a child in the carrier with the
• To take a child on a bicycle, the rider must
bicycle supported only by the kick stand.
normally be over 16 years. Check your state
• DO NOT use the carrier if any part is broken or
and local laws and regulations.
missing.
• The child seat is approved for children from
• DO NOT modify the carrier. This may create a
about 1 to 6 years or maximum 18 kg (40 lb)
dangerous condition and will invalidate the
weight. Ensure that you re-check from time to
warranty.
time that the child's weight and size do not
• DO NOT attach extra luggage or equipment
exceed the maximum capacity of the seat.
to the carrier, as they may exceed the load
• Do not carry a child that is too young to sit
limit and lessen stability. The maximum
safely in the seat. The child must be able to sit
capacity of the carrier is 18 kg (40 lb).
unaided for a longer period of time, at least as
• IMPORTANT: The load of a child carrier will
long as the intended bicycle journey. Please
lessen the bicycle's stability and alter
observe the recommended minimum age. If
handling characteristics, particularly steering
you are uncertain, or the child is under one
and braking.
year of age, please consult a pediatrician.
• Presence of a child carrier on a bicycle may
• Ensure that it is not possible for any part of
require alteration of the method used by the
the child's body, clothing, shoe laces or toys to
rider to mount or dismount the bicycle. Take
come into contact with any moving part of the
care when getting on or off bicycle.
seat or cycle. Re-check as the child grows, due
• Before each ride, ensure the mounted carrier
to the danger of entrapment of feet in the
does not interfere with braking, pedaling or
wheel and of the fingers in brake mechanisms
steering of the bicycle.
and saddle springs. The child seat gives good
• Before each ride, ensure that the bracket
side and feet protection. However, Hamax
screws are well tightened to ensure that the
recommends that you buy and install a closed
seat does not slide.
wheel guard/chain guard. You can buy this at
• Before each ride, ensure that the green safety
your bicycle dealer.
indicators on the bracket are visible.
• Check there are no sharp objects, such as split
• NEVER ride the bicycle in inclement or
wires, on the bicycle that can harm the child.
hazardous conditions.
• Ensure that the restraint system is not loose
• NEVER ride the bicycle at night without
or able to become trapped in any moving
adequate lighting.
parts particularly the wheels, including when
• Reflectors meeting CPSC regulations must
the cycle is ridden without a child in the seat.
be visible whether the carrier is on the
• A child sitting in a child seat should be dressed
bicycle or not.
more warmly than the rider.
• BE CERTAIN any exposed saddle springs are
• Protect the child against rain with suitable
covered.
waterproof garments.
• BE CERTAIN foot protectors are attached.
• Remember that the child seat can get very hot
standing out in the sunshine, so check the
INSTALLATION
child seat before placing your child in it.
• Can be mounted on bicycles with frame tube
• When transporting the bicycle on a motor
diameters from 28-40 mm.
vehicle remove the seat from the bicycle to
• Cannot be mounted on bicycles with oval or
avoid the force of high wind on the carrier,
square down tubes.
which may damage the seat or loosen its
• Cannot be mounted on bicycles fitted with
fastenings to the cycle, which could result in
shock absorbers.
an accident.
• Can be fitted to bicycles with and without a
luggage carrier.
MAINTENANCE
• Cannot be mounted where the luggage carrier
• When cleaning the seat, use only lukewarm
is wider than 160 mm. The luggage carrier can
soapy water.
be removed before fitting the child seat.
• If the child seat is involved in an accident or
• If you are in any doubt that the seat will fit, we
are damaged, contact your dealer to check
recommend that you seek information from
that it can still be used. Damaged parts must
the bicycle's supplier.
always be replaced. Contact your dealer if
• Mount seat only on a bicycle that is in good
you are not sure how to fit the new parts.
working order, suitable for this kind of load,
and of proper size and adjustment for the
Tip! With an extra bracket you can easily move
rider. Please check the information supplied
one seat between two bicycles.
with the bicycle or ask the manufacturer or
your bicycle supplier for detailed advice.
We wish you and your child many enjoyable
• The child seat is fitted on the frame tube of
bicycle trips with your Hamax child seat!
the bike with the bracket (6). See picture F.

Publicidad

Tabla de contenido
loading

Resumen de contenidos para Hamax Zenith Relax

  • Página 1 Check the tightness of the injury or death to the child or rider. To reduce bracket screws frequently. Congratulations on purchasing the Hamax bicycle child seat. You now have Manual these risks read and follow the important • For optimal comfort and safety of the child, a comfortable and safe child seat when used as intended that can be warnings and instructions below.
  • Página 2 Zenith Relax 1. Siège principal 2. Système de harnais 3. Fermeture de ceinture 4. Supports de pieds 5. Arc porteur 1. Main seat 6. Étrier de fixation complet a) Étrier 2. Restraint system b) Sangles métalliques 3. Belt lock c) Vis de fixation d) Indicateur de sécurité...
  • Página 3 - IMPORTANT : La charge d’un porte- siège. et que l’enfant ne puisse glisser bébés réduira la stabilité de la hors du siège. Hamax recommande que bicyclette et modifiera ses le dossier soit légèrement incliné vers caractéristiques, particulièrement celles l’arrière.
  • Página 4: Instalación

    En cualquier caso, Hamax le les mécanismes de frein et les ressorts - Si le siège pour enfants a souffert un - No puede montarse en bicicletas que de la selle.
  • Página 5 User Manual Zenith Relax...
  • Página 6 Remove the transportation lock Remove cable tie & protective foam blocks Zenith Relax Zenith Relax Press the front of the mounting bracket (6) to release the Remove the cable tie (11) by clipping them, then remove the bracket from the transportation pins (13). Remove the protection foam blocks (12) from the front and back.
  • Página 7 Remove locking pin Mount the carrier bar to the seat Zenith Relax Zenith Relax Insert the carrier bow (5) Turn the seat (1) upside down. Turn the locking through the holes as shown below. pin (7) and push down the two snapfits before you pull the locking pin completely out.
  • Página 8 Insert locking pin Fastening bracket Zenith Relax Zenith Relax Insert the locking pin (7) through the holes Place the fastening bracket under the seat base, keeping it in unlocked position (6a) over the frame tube of the to allow final adjustment later on.
  • Página 9 (serrer et resserrer) : guardabarros/el portaequipajes y el asiento infantil de la bicicleta. Étrier Hamax de fixation: Soporte de sujeción Hamax: Le couple de serrage recommandé est de Assurez-vous que l’arc porteur est Asegúrese de que el arco de transporte 10 Nm.
  • Página 10: Adjusting The Seat

    Adjusting the seat Foot rest adjustment Zenith Relax Zenith Relax Make sure the locking pin (7) is in How to release the foot rest (4): Release the footrest the unlocked position before adjusting handle on the back by flipping it upwards. Move the foot...
  • Página 11 Extra footguard Foot strap adjustment Zenith Relax Zenith Relax How to fasten/release the foot strap (a): To fasten the To mount the extra foot guard (9): foot strap put the strap into the track and pull down to Press the foot guard into the fitting preferred length.
  • Página 12 Restraint system Chest buckle adjustment Zenith Relax Zenith Relax The restraint system (2) can be attached and detached by The restraint system length can pressing in or out the belt lock (3) shown in pic. 1. It is important be adjusted by adjusting buckle a to press at the middle of the belt lock button (pic.
  • Página 13 Reclinable function How to remove the seat Zenith Relax Zenith Relax To recline the seat press the The seat (1) is easy to PRESS reclining knob (9) down and at the same remove from the bicycle when time twist to the required position.
  • Página 14 Before embarking on a bicycle trip Zenith Relax • Adjust the restraint system (2) to ensure the child is snugly restrained in the seat. • Adjust the foot rests (4) and fasten foot straps. WARNING • Check that the green safety indicators (6d) of the bracket are visible.
  • Página 15: Problem Solving

    With an extra bracket (6) you can easily move one seat mounted, there is an extra bar available which may solve your between two bicycles. Hamax fastening bracket (6) is available in problem. Please contact your bicycle dealer. two version; standard and lockable Art.
  • Página 16 This can be useful if your bicycle has a frame diameter outside the range of 28–40 mm, or if you have an electrical bicycle. Read more about the carrier adapters at www.hamax.com/child- bike-seat/caress-collection/zenith-with-carrier-adapter Full assembly instructions follows the product when purchased, and can also ble downloaded from www.hamax.com.

Tabla de contenido