When Connecting With A Rear View Camera - Pioneer AVH-X7500BT Manual De Instalación

Connecting the units
When connecting with a rear
view camera
When the shift lever is switched to REVERSE
(R), the display on this unit automatically
switches to the rear view image. You need to set
the Camera Polarity properly in the system
menu.
You can also switch the rear view image by
pressing the touch panel key.
For details, refer to operation manual.
WARNING
USE INPUT ONLY FOR REVERSE OR MIR-
ROR IMAGE REAR VIEW CAMERA. OTHER
USE MAY RESULT IN INJURY OR DAM-
AGE.
CAUTION
! You must use a camera which outputs
mirror reversed images.
! The screen image may appear reversed.
! The rear view camera function is to be used
as an aid to keep an eye on trailers, or while
backing up. Do not use for entertainment
purposes.
! Objects in the rear view may appear closer or
more distant than they actually are.
This product
Rear view camera input
(REAR VIEW CAMERA IN)
13 cm
RCA cable
(sold separately)
To video output
Violet/white
Of the two lead wires
connected to the back lamp,
connect the one in which the
Rear view camera
voltage changes when the
(sold separately)
gear shift is in the REVERSE
(R) position. This connection
enables the unit to
sense whether the car is
moving forwards or
backwards.
Connecting the units
iPod with lightning connector
When connecting with
Lightning to USB Cable
This product USB/iPod input
USB cable
(Supplied with this unit)
Connect to separately sold
USB device.
Lightning to USB Cable
(Supplied with iPod/iPhone)
iPod with lightning
connector
(sold separately)
When connecting with optional
CD-IV202AV cable
USB/iPod input
This product
RGB input
VGA/USB interface cable(*1)
(sold separately)
Lightning to USB Cable
(Supplied with iPod/iPhone)
Lightning to VGA Adapter
(Apple Inc. products)
(sold separately)
iPod with lightning connector
(sold separately)
(*1)
For details of how to connect the separately
sold VGA/USB interface cable (CD-IV202AV),
refer to the VGA/USB interface cable manual.
Section
01
5
En